Call now
Same day service
£ No call-out fee
Fully insured
12-month guarantee
Nottingham's trusted local plumbing specialists

Need an outside tap? We'll fit it today.

Professional outside tap installation across Nottingham.

Call us on 0115 912 3456
HomeGeneral PlumbingOutside Tap Installation

An outside tap is incredibly useful for watering the garden, washing the car, filling paddling pools, and cleaning tools. But it needs installing properly with an isolation valve inside so you can turn it off in winter, and frost-proof fittings so it doesn't burst when temperatures drop. In Nottingham's cold winters, unprotected outside taps freeze and crack, causing leaks inside the wall cavity.

We install outside taps by tapping off the kitchen cold supply, running pipe through the wall, and fitting a frost-resistant bib tap outside with a backplate. Inside, we fit an isolation valve so you can drain and turn off the tap before winter. Most installations take 2-3 hours including drilling through the wall and testing.

We operate across all Nottingham areas. No call-out fee. All outside tap installations carry a 12-month guarantee.

What's Included in Outside Tap Installation

Isolation valve inside

We fit a quarter-turn valve on the supply pipe inside. Turn it off in winter to prevent freezing. This is essential for frost protection.

Pipe run through wall

We drill through the external wall, run copper or plastic pipe to the outside location, and seal the hole to prevent drafts and water ingress.

Frost-resistant tap

We fit a bib tap with a backplate on the outside wall. The tap drains back when closed so water doesn't sit in the spout and freeze.

Testing

We test under full pressure, check for leaks at all joints, and show you how to isolate and drain the tap for winter.

Choosing the Right Location

1

Near the kitchen

Outside taps are usually fitted near the kitchen sink for easy connection to the cold supply. This minimises pipe runs and cost.

2

Convenient height

We fit taps at waist height for easy use. Too low and you're bending down with watering cans, too high and it splashes everywhere.

3

Avoid north-facing walls

North-facing taps get no sun and freeze more easily. If possible, choose a south or west-facing wall. If not, we'll fit extra insulation.

4

Check for obstacles

Make sure there's space for a bucket or hose connection under the tap. Don't site it where paving or walls block access.

Winter Protection

1

Turn off the isolation valve

Before the first frost, turn off the inside isolation valve. This stops water reaching the outside tap.

2

Open the outside tap

With the isolation closed, open the outside tap to drain any water left in the pipe. Leave it open all winter.

3

Insulate if needed

If the tap is on a north-facing wall or you forget to drain it, fit an insulated tap cover for extra protection.

4

Reopen in spring

Close the outside tap, reopen the isolation valve inside, check for leaks. You're ready for summer watering.

Upfront prices, no nasty surprises

We'll always tell you the cost before we start. These are typical price ranges, your exact quote depends on the job.

ServiceTypical Cost
Standard outside tap installation£120-£180
Long pipe run (5m+)£180-£250
Second outside tap£100-£150
Additional materials£15-£75

All prices are estimated. Final costs depend on the specific job. We provide detailed quotes before starting work.

Got questions? Here's the quick answers.

How much does outside tap installation cost in Nottingham?
Standard installations near the kitchen cost £120-£180 across Nottingham and surrounding areas. Longer pipe runs or difficult access costs £180-£250. Adding a second tap costs £100-£150.
How long does outside tap installation take?
Most installations take 2-3 hours including drilling through the wall, running pipe, fitting the tap, and testing. Complex runs take longer, whether you're in City Centre, West Bridgford, or Beeston.
Will you make a mess drilling through my wall?
We use dustsheets and a vacuum attachment on the drill. We clean up debris and seal the hole properly. Minimal mess We cover all Nottingham areas including NG1, NG2, and NG9 postcodes.
Can I fit an outside tap to a flat or rented property?
You'll need landlord permission for anything involving drilling external walls. Check your tenancy agreement first We cover all Nottingham areas including NG1, NG2, and NG9 postcodes.
Do I need to turn off the outside tap in winter?
Yes, turn off the isolation valve inside and drain the tap. Frozen water in the tap or pipe can burst it, causing leaks inside the wall We cover all Nottingham areas including NG1, NG2, and NG9 postcodes.
Can you fit the tap anywhere I want?
We'll advise on the best location based on access to the water supply. Very long runs or complex routes cost more and take longer We cover all Nottingham areas including NG1, NG2, and NG9 postcodes.
What if I want two outside taps?
No problem. We run pipe to both locations from the same supply. Common for front and back gardens. The second tap costs less as we're already there We cover all Nottingham areas including NG1, NG2, and NG9 postcodes.
Can I connect a hose permanently?
Yes, but disconnect it in winter. Hoses trap water that freezes and can damage the tap. We can fit a double check valve if you want permanent hose connection We cover all Nottingham areas including NG1, NG2, and NG9 postcodes.
Will the tap reduce my water pressure inside?
No, it's just another outlet. Only if multiple taps run simultaneously will you notice reduced pressure, same as running any tap inside We cover all Nottingham areas including NG1, NG2, and NG9 postcodes.
Back to General Plumbing

Request a free quote

Tell us what you need and we'll get back to you with a no-obligation quote, usually within the hour during working hours.

0115 912 3456
Mon-Thurs 8:30am-6pm, Fri 9am-4pm
Covering all Nottingham postcodes

Quick quote request

Need a plumber in Nottingham?

Call now for a free, no-obligation quote. Same day service available.

Call us on 0115 912 3456