New sink? We'll install it properly.

Drop into a cut-out in the worktop. Stainless steel, ceramic, or composite. We cut the worktop, seal the rim, and clamp from underneath.

Fixed under the worktop for a clean look. Need solid worktops (stone, quartz, solid wood). More complex installation but very sleek.

Deep ceramic sinks mounted on brackets or in a stand. Common in older properties. We fit wall brackets securely and connect waste properly.

Wall-hung, pedestal, countertop, or undermount. Each needs different fixing methods. We ensure secure mounting and proper waste connections.

We cut worktops to size for inset sinks using template provided. Clean edges, no chipping. For undermounts, worktop fabricators usually cut, we just fit.

We fix sinks with clips, adhesive, or wall brackets depending on type. Everything is secured so it won't move or work loose.

We fit taps with proper sealing, connect waste with trap, and seal the waste outlet. Dishwasher connections added if needed.

We connect hot and cold supplies and waste to existing pipes. We fit isolation valves if there aren't any.

We seal around the sink edge with silicone, let it cure, test taps and waste under full flow, check for leaks.

No sealant or poor quality sealant. Water seeps under the sink and damages worktops. We use sanitary-grade silicone that lasts.

Waste not sealed properly or overtightened, cracking the plastic. We fit wastes correctly, hand-tight with washers, no leaks.

Clips not tightened or adhesive not used on undermounts. The sink moves when you lean on it. We secure properly.

Waste pipe doesn't have proper fall or the trap is wrong type. We fit waste correctly so it drains freely.